The Brill Razorcut 33 is a premium, German engineered reel lawnmower that is perfect for small to medium sized yards. The lawnmower features a cylinder with hardened steel cutting blades, with the spindle mounted on sealed ball bearings so that it spins more easily. Unlike many other reel mowers, the Brill blades use a contact free cutting technology, preventing metal on metal contact and significantly increasing blade life. The "silent cut" design means that you can hear the environment around you when you mow and not disturb others with engine noise. A top cover protects your flowers and shrubs from the blades, and the extended spoiler in the back helps keep grass clippings from landing on your shoes when you cut the grass. The cutting height is infinitely adjustable from 14 to 45 millimeters (.7 inches to 1.8 inches), with a measuring scale on both sides of the mower. The Razorcut 33 features 5 blades, which is the best number for the balance between ease of pushing and grass cutting ability. Metal components of the Razorcut have a dry powder coat, which resists chipping, scratching and rust. The cutting width is 13 inches and the wheels are 8 inch. The Brill Razorcut 33 weighs just 17 pounds, which makes it very easy to pick up, and easy to push through the grass. Other competing reel mowers weigh more than 50 pounds! The Razorcut 33 comes fully assembled, except for the handle. The handle goes together in minutes and snaps onto the mower, with no tools required. The Brill Razorcut 33 works on most types of grass, but is not recommended for St. Augustine, Zoysia or Bermuda. The Razorcut 33 has a 2 year manufacturer's warranty. area rug cleaning ny : Brill 78366 Razorcut 33 13-Inch Reel Push Lawn Mower>Compare Prices<
I bought this mower believing it would be quiet and light weight. It is light weight but not very quiet. I wonder if I received one with dry bearings? The assembly was very straightforward, thank goodness, given that the instructions carry no words (only pictures). I used it immediately and mowed a small lawn of mixed grasses in the So. California region. The cut was close and I raised the blades to the next setting and it was still close, but by that time I had no grass left and have to wait for the grass to grow before I can experience the next raised level. I hope it can be raised to an appropriate level. My small yard, actually it qualifies as teeny, has undulations which the mower handled well--it cut the grass. Just to give an idea how small the yard is, I was using grass shears until I decided which mower to buy. This mower is small, the roller measure 13" wide. As a matter of fact, I was wondering if I should have opted for the larger Brill (Razor 38) as it will add 2 more inches to the width of the cutting blades which will make it more useful in future lawns (I'm renting). But, I love the smallness of this mower and how easy it is to carry or move.I've used two reel mowers in the past. One, a Sears Craftsman behemoth that weighed a ton. It was one of a kind because it had height adjustments. It got the job done but was taxing (and that was a very small yard too, but the mower had to be carried a greater distance, and I was much younger ; The next reel mower I used was of a Garden variety, white in color and came with the house I rented. That mower was heavy and I had to cut the grass in several passes. The Garden mower was loud and I wondered how long it'd been part of the house, maybe the blades needed adjustment or filing.This mower by contrast is light weight, easily maneuverable and it cuts the grass on the first pass. That's pretty good since I have a potpourri of different grasses growing. I was also hoping the blade would need little maintenance over time, however that will only be determined with time.With the exception of the noise, I'm satisfied with this mower. The Brill is mostly made of plastic and I don't mind that because compared to what I hauled around the yard to cut the grass with, this is much better. I also note that it will probably have less rust with time. I was seriously considering the Helix EcoMower and eventually sided with the Brill, mainly because of the weight.If when I use the mower for the second time I deem it to be still too loud I may return it and request another. Otherwise, I'm satisfied with the quality, performance and love especially the lightness of the mower. I will heed the opinion of the other reviewers and make sure the nuts and bolts are tight upon each use (thanks for the advise!).
I have had this lawn mower for two years now. The blades are still sharp. It's lightweight. I can mow at night or in the morning and not worry about the noise bothering anyone. I'm single and I love that I never have to worry about it not starting! It cuts the grass beautifully. Another girlfriend just bought one and is thrilled with hers as well.The only annoying thing is that if you are carrying the lawn mower for whatever reason, as in I have to lift it from my garage up my cement steps to my yard, the handle sometimes unlatches off the mower part. There should be a clip or something to keep the handle hooked on, but there isn't....
First off, to be fair to Brill, I do own this mower, but most of the points on this review pertain to any reel mower. I bought this with good intentions after my gas powered mower quit working. I like the low maintenance and human powered aspect of a reel mower, but I had the following issues with it. Note that I used it for 2 seasons before buying the Worx electric mower (great machine, BTW).1) My biggest complaint with this mower was that it cut the grass way too short, even on the highest setting. I live in Colorado where we have dry summers. You need to leave some length on the grass to prevent your lawn from drying out on the hot summer days.2) The mower stopped when rolling over the smallest stick. I had to take the time to comb through my lawn picking up every tiny stick in the grass. Even then, I inevitably missed a few which causes the blade to lock up. You then need to shake the mower or turn it over and dig the stick out.3) No suction. Ok this one is obvious, but I really missed being able to use my mower for fall cleanup - i.e. Running the mower over the yard in the fall to get the stray leaves and sticks that accumulate. This makes for a nice crisp lawn.4) Specific to this mover: The handle often came loose from the body. When carrying the mower from place to place the handle would disengage from the base. I eventually learned how to carry it better to help this, but it would still happen every few cuts.5) Specific to this mower: The height adjustment is just a screw tight method. This would often loosen up and the mower would go down to the lowest setting. I would have to readjust this before every cut.My advise: Avoid reel mowers and go to an electric.
I so wanted to love this mower....but alas, it is not to be. Our lawn is a little bumpy, and this mower cannot tolerate unevenness in the mowing surface. It just stops. When we try to push through that, it rips out the grass by its roots. Not good.The other drawback is that the maximum mowing height is less than 1.5 inches. For a green lawn here in Southern California, it's best to have the grass longer for it to be healthy. After two attempts at making this mower work for us, we are sending it back. Hopefully, the Fiskar mower we ordered will do a better job.For those who have a golf course type lawn (even, well-manicured) this mower will work probably work like a charm.Update 5/17/11: Our new Fiskar push mower is perfect for our needs! Amazon got it to us quickly, and refunded us for the Brill mower we returned. We are happy customers.
No comments:
Post a Comment