Eccotemp FVI-12-NG High Capacity Gas Tankless Water Heater | (customer reviews) By Eccotemp Systems Special Price! for Eccotemp FVI-12-NG High Capacity Gas Tankless Water Heater With Special Pomotions & great FREE Super Saver Shipping on orders over $25. Read Details
|
Eccotemp FVI-12-NG High Capacity Gas Tankless Water Heater Review
Eccotemp FVI-12-NG High Capacity Gas Tankless Water Heater Overviews
Forced Vent Indoor Tankless Water Heater Practical and Affordable This tank is for indoor installation, high efficiency, tankless water heating system designed for small to medium hot water production where you need more than one hot water application at the same time. The water heater is perfect for vacation cabins, cottages, and smaller homes. Sleek modern design Delivers up to 3.4 gallons per minute of piping hot water Power ventilation for safety, efficiency and venting options Tested-Safe Electronic ignition system 74,000 BTU Digital temperature display Fully independent gas and water controls Precise temperature and water flow adjustment Weighs only 20 pounds Unit Dimensions are 15"x24"x4" Stainless vent kit included Uses gas only when hot water is on. Requires standard household 120 volt electric outlet The water sizes are 1/2 NPT. The gas is also 1/2" NPT. UL listed cord LPG 2 year warranty Ships Quickly
best gas hot water heaters : Eccotemp FVI-12-NG High Capacity Gas Tankless Water Heater >Compare Prices<
Eccotemp FVI-12-NG High Capacity Gas Tankless Water Heater Feature
- best gas hot water heaters : Eccotemp FVI-12-NG High Capacity Gas Tankless Water Heater Check Product Rating
Customer Reviews
This eccotemp hot water heater works great for me (we have now used it for over a year). We had the same problem as the previous review; when the water turned ice cold in the middle of showers and simply turned to max hot water heater setting down to 118 degrees (most manufacturers suggest a 110 degree setting). We have never had a problem since... Tim
This seems to be performing as expected for supplying the bathtub/shower. There seems to be some difficulty with it supplying the sink. The output seems to be too hot or too cold, hard to achieve a happy medium. The only difference lies in that the sink is a single faucet system as opposed to the two faucets on the bathtub/shower.
This unit works great BUT, buy the next size larger. Learning lesson, It was easy to install since I was replacing a tank hot water heater. I set the venting so it was close to the previous venting.The unit works great here is the Good::Heats up and can set it very hot. You have to so you can dilute it with the cold water. You do this if you was your water pressure back.Easy to install and they have great customer service support.The Bad:I have a kitchen sink, a bathroom sink and bath tub/shower. You can not use any of these together. The bath tub/Shower is the worst. I lost water pressure after installing it. I have 65 PSI coming into the house which should be enough. But I loose pressure on the hot water side. But like I said I have the water Temp set high so it is so hot you have to dilute it with the cold side which gives me the pressure back.So my advise is to buy the next size up no matter what size the chart says you need. I plan on buying the 40-HI-NG Amazon price is $ 389.00about $ 160.00 below retail. Look for my review on this one in about a month
It works good for one appliance or fixture at a time. When i use it for the shower it cuts the flow down dramatically to achieve the desired temp.
The Eccotemp FVI-12-NG High Capacity Gas Tankless Water Heater did not have enough water flow for the bathtub. The 1/2 inch inlet and outlets are just not big enough. I recoommend the 40NI at a minimum as it has 3/4 inch inlet. It is rated at 6+ gpm instead of 3.5 gpm. Not sure why they call it High Capacity and say it is a good unit for a 1 bath house. It worked great though and is well built and very attractive as far as a water heater goes.
This small unit was perfect for my two bedroom one bath house. The issue is this; if you have single handle faucets, when tempering the hot water the blend valve reduces hot water flow while introducing cold water to the stream. The water heater senses the reduction in flow and shuts off, giving the bather a dose of cold water. Using the controls on the water heater to reduce gas flow and temperature setting allows the user to set the hot water temperature to about 110 degrees. This allows you to set the water valve on your single lever faucet to full hot and leave it there for the duration. The other solution, which I plan to implement as soon as finances allow, is to replace the single handle faucets with two-handle, two-valve faucets. Other than this little bit of behavior modification the unit works great!
...More Reviews...
Eccotemp FVI-12-NG High Capacity Gas Tankless Water Heater Best Price
Item Availability : Usually ships in 24 hours Read Customer review and Compare price of all dealers for Eccotemp FVI-12-NG High Capacity Gas Tankless Water Heater |
Relate Items
- Eccotemp FVI-12-LP High Capacity Propane Tankless Water Heater
- Eccotemp 40HI-NG Indoor Gas Tankless Water Heater, 135,000 British Thermal Unit
- Eccotemp L10 High Capacity Outdoor Tankless Water Heater
- Eccotemp 40H-NG Outdoor Gas Tankless Water Heater, 135,000 British Thermal Unit
- Rheem RTE 13 Electric Tankless Water Heater, 4 GPM
No comments:
Post a Comment